Analog Front End IC for 4-7 cell Li-Ion / Li-Po battery pack
May 20, 2021
Campbell, CA, May 20, 2021 - Ricoh Electronic Devices Co., Ltd. in Japan has launched a new advanced Analog Front End IC, a battery management IC for monitoring the condition of Lithium-Ion and Lithium-Polymer battery pack configurations consisting of 4 to 7-cells in series. Analog Front End ICs perform cell measurements processed by a host microcontroller resulting in a flexible concept shortening the lead time to the market. Applications include cordless power tools, electrical bicycles, robot vacuum cleaners, robot lawn mowers, drones and more.
The R5602 provides integral protection by measuring the state of the individual cells and the battery pack in general. The microcontroller determines unsafe or faulty operating conditions such as overvoltage, undervoltage, overtemperature, overcurrent, cell imbalance, state of charge etcetera. The R5602 has an integrated charge pump for driving external high-side N-channel MOSFETs controlling the charge and discharge process. The use of high-side MOSFETs have a significant advantage to develop a circuit sharing the ground pin terminals of the AFE with other peripheral ICs in the circuit resulting in a better accuracy of cell measurements. All monitoring specifications are stored in software settings and can be easily updated if needed or a more sophisticated monitoring algorithm can be specified by design. A list of included advanced features:
High-accuracy cell voltage sampling (±30mV) *-20℃ to 85℃, VVCIN=3V to 4.2V, VDD≥ 6.0 V. Cell voltages are balanced.
High-speed cell voltage sampling (<1 ms / measurement, including A/D conversion)
Current sense by external sense resistor, option to scale results by gain settings x2.5, x10, x20
Additional charge and discharge overcurrent and short circuit detection
Built-in 12-Bit A/D Converter
Embedded die temperature sensor as well as inputs for two additional temperature sensors
Allows random cell connection sequence during battery pack manufacturing (at CE pin=”L”)
Built-in passive cell balancing with internal switches and external resistance
Built-in cell open-wire detection switches
Multiple power modes are supported ranging from Max.1uA in standby mode up to Typ. 150uA in normal operating condition. The IC switches automatically between idle and normal mode based on battery conditions but can be forced into the standby mode by controlling the CE pin to lower current consumption to a minimum.
An internal voltage regulator provides power to the host microcontroller IC, simplifying the circuit design and reducing board space. In order to select a suitable microcontroller of your preference, both I2C and SPI communication interface with or without CRC communication error detection are supported. An interrupt signal appears on the INTB output when a fault or not ready condition occurs. The R5602L is available in a 32 pins QFN0505-32C package, samples and evaluation boards are available from authorized local distribution channels and online partners Mouser and Digi-Key.
Features R5602:
Absolute Maximum Rating: -0.3V to 40 V
Power Consumption: Active mode / Standby mode: Typ. 150 µA / Max. 1.0 μA
Cell Measurement: Built-in 12-bit A/D Converter
Cell Voltage Monitoring: Input range: 1.5 to 4.5 V
Cell Voltage Monitoring Accuracy: ±30 mV*
-20℃ to 85℃, VVCIN=3V to 4.2V, VDD≥ 6.0 V. Cell voltages are balanced.
Digitization of Voltage across Sense Resistor: Gain: x2.5 / x10 / x20
Temperature Monitoring: 2 external NTCs
Die Temperature Monitoring and High Temperature alert
Voltage Regulator Output: Typ. 3.4V
Monitoring Speed: < 1 ms / 1 Monitor
Enhanced Overcurrent Protection: Charge / Discharge overcurrent, Short-Circuit detection
Protection: Built-in switch for Open-wire detection
Random cell connection sequence acceptable (CE = Low)
Charge / Discharge Control: Dual High-side N-channel MOSFET
Built-in Cell Balancing: Current control by external resistor (up to 20mA)
Communication Interface: I2C and SPI Interface with / without CRC
Package R5602L: (5.0 x 5.0 x 0.8 mm) QFN0505-32C
Datasheet: https://www.n-redc.co.jp/en/pdf/datasheet/r5602-ea.pdf
About Ricoh Electronic Devices Co., Ltd
Ricoh Electronic Devices Co., Ltd is a leading global provider of semiconductor products, offering a comprehensive portfolio of CMOS Power Management and Real Time Clock ICs that enable engineers to design advanced applications for the consumer, industrial and automotive markets. The companies headquarter is based in Japan, as well as development, sales and manufacturing facilities. Regional sales and support offices are located in North America, Europe, and Asia.
Ricoh has an extensive expertise in small package technology and has a focus on developing products providing features such as low-supply current, high-accuracy, high efficiency and high-reliability.
For further information, please visit https://www.n-redc.co.jp/en/ or contact:
RICOH Americas Holding, Inc.Electronic Devices DivisionTel: (408) 610-3105Email: edd@ricoh-usa.com
| About Ricoh |Ricoh is empowering digital workplaces using innovative technologies and services, thus enabling individuals to work smarter.
With cultivated knowledge and organizational capabilities nurtured over its 85-years history, Ricoh is a leading provider of document management solutions, IT services, communications services, commercial and industrial printing, digital cameras, and industrial systems.
Headquartered in Tokyo, Ricoh Group has major operations throughout the world and its products and services now reach customers in approximately 200 countries and regions. In the financial year ended March 2021, Ricoh Group had worldwide sales of 1,682 billion yen (approx. 15.1 billion USD).
For further information, please visit www.ricoh.com